Capacity 1,950 to 32,100 m3/h (1,150 to 18,900 ACFM)
The NASH 2BE4 liquid ring vacuum pump and compressor series have been optimized to deliver a 6-8% efficiency improvement over previous 2BE models. Based on the proven reliable flat sided liquid ring vacuum pump design the 2BE4 has a polyisoprene lined body, flexible inlet and discharge connections, and a large inspection port for improved performance and reliability. With capacity ranging from 1,950 to 32,100 m³/h (1,150 to 18,900 ACFM), the 2BE4 is well matched to demanding environments like the paper, power, mining, and chemical process industries.
The 2BE4 liquid ring vacuum pump and compressor series is an upgrade to the proven 2BE3 model and has been engineered to deliver improved performance, reliability, and efficiency over the previous models. Compared to previous models the 2BE4 offers efficiency improvements up to 8% and has reduced maintenance requirements.
Split Vacuum Capability
The 2BE4 pumps allow efficient operation over the entire vacuum range without the need to change the pump's internals. When equipped with a center shroud, split vacuum operation up to 12 inHg (400 millibar) differential can be achieved. The advantage of this is significant because it allows the use of fewer vacuum pumps–which saves space and installation costs.
Robust And Low Maintenance Based On Proven Flat Sided 2BE Design
Port plates with variable porting so pump performance is optimized across the entire operating range.
Large differential pressure capability
High liquid carryover tolerance
Large inspection ports allow for easy internal inspections
Orifice to drain pump completely when shut down
Operates As A Vacuum Pump & Compressor With A Discharge Pressure Range of 36 psia (2.5 bar abs.)
Some applications require vacuum and compression in one process. Instead of handling the gas with two separate machines, our liquid ring vacuum pump and compressor models can do the job with only one pump - reducing cost and simplifying installation.
Flexible Installation & Quiet Operation
The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the NASH 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. 2BE4 pumps are amazingly quiet during operation. Sound levels of 72 to 85 dB(A) (measured at a distance of 3.3 ft (1 meter) from the source) have been recorded for even the largest of the pump models.
Designed To Operate In Demanding Environments
Designed to operate in demanding environments like the paper, power, mining, sugar, and chemical process industries, these pumps offer durability and reliability at a low cost of operation. The standard polyisoprene lining on the pump body resists aggressive process gases and liquids to provide exceptional corrosion resistance. The polyisoprene lining also consumes less energy than the equivalent unlined pump. For added corrosion resistance, stainless steel internal components are available in certain models.
Technical Data
Suction Capacity: 2,000 to 32,200 m3/h (1,150 to 18,900 ACFM)
Vacuum Range: to 160 mbar abs. (to 4 inHgA)
Maximum Discharge Pressure: 2.5 bars abs (36 psia)
India (EN)
